Advertisement
Quick Links
Home Cinema 660/760HD/1060
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online User's Guide.
Note: Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Connect the projector
Choose from the following connections. See the sections below or the online
User's Guide for details.
Video device
Connect multiple video devices and use the Source Search button on the
projector or the remote control to switch between them.
Home Cinema 660/760HD
Home Cinema 1060
Mobile media device (Home Cinema 1060)
Connect tablets, smartphones, and other devices that support the MHL™
standard to the HDMI2/MHL port.
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device's documentation for
more information.
Computer
Connect one end of an HDMI cable to one of the projector's HDMI ports shown
above and the other end to an HDMI port on your computer.
Note: For more information on connecting the projector to your computer or
other devices (camera, USB flash drive, etc.), see the online User's Guide.
Component video
to VGA cable
HDMI cable
RCA video cable
(composite video)
HDMI cable
Component video
to VGA cable
RCA video cable
(composite video)
MHL cable
Streaming device
Connect audio
Built-in speaker
The projector has a built-in speaker that can play audio from a video source
(DVD player, streaming device, etc.) connected by an HDMI cable. If you do not
use an HDMI connection, you must connect your device's audio output to the
projector's audio input.
Home Cinema 660/760HD
Home Cinema 1060
External speakers
Connect your device's audio output to your home theater receiver or powered
speakers.
Note: The internal speaker is disabled when an external device is connected.
If you are using an HDMI connection to the projector, you may need to reduce
the projector speaker volume to zero (0), or make sure that the correct audio
output is selected on your device.
Home theater system
Video source
Surround sound
Powered speakers
External speakers
Video source
Note: See your home theater receiver documentation for more information
on connections.
Turn on your equipment
1
Turn on your video source or computer.
2
Plug in the projector. The
HDMI cable
RCA audio cable
HDMI cable
RCA audio cable
Video cable
Receiver
Projector
Video cable
Projector
power light on the projector turns blue.
Advertisement
Related Manuals for Epson Home Cinema 760HD
Summary of Contents for Epson Home Cinema 760HD
- Page 1 Home Cinema 660/760HD/1060 Quick Setup Connect audio Built-in speaker Before using the projector, make sure you read the safety instructions in the online User’s Guide. The projector has a built-in speaker that can play audio from a video source (DVD player, streaming device, etc.) connected by an HDMI cable. If you do not Note: Your product may differ from the illustrations on this sheet, but the use an HDMI connection, you must connect your device’s audio output to the instructions are the same.
- Page 2 Home Cinema 660: To reduce or enlarge the image, press the T (reduce) or W (enlarge) button on the projector. For more information on using the remote control, see the online User’s Guide. Home Cinema 760HD/1060: To reduce or enlarge the image, turn the zoom ring. Home Cinema 660 Home Cinema...
- Page 3 This equipment is restricted to indoor operation only. to access the online manual (requires an Internet connection). If you don’t have a User’s Guide icon, you can install it from the projector CD or go to the Epson U.S. FCC Notices website, as described below.
- Page 4 Epson within five working days of receipt of the replacement. Epson requires a debit or a credit card number to secure the cost of the replacement product in the event that you fail to return the defective one.