Setting Up Epson Moviemate - Epson MovieMate 72 Quick Manual

Setting Up Epson MovieMate

1. If you have a screen, set it up following the instructions included with the
screen. Make sure you read all the instructions to avoid damaging the screen.
2. Put the batteries in the remote control.
3. Expose the remote control to bright light for several minutes before using it in
the dark. The buttons will glow in the dark briefly.
4. If you want to place MovieMate in front of you and have convenient access to
the DVD slot, rotate the upper section:
5. Open the lens cover, then connect the power cord and plug in MovieMate.
The and
8
Unpacking and Setting Up
lights turn orange.
Image Off