Craftsman 315.115650 Operator's Manual page 11

BATTERY PACK
SHOWNiN CHARGER
CHARGING
ASSEMBLY
TO REMOVE BATTERY PACK
See Figure 3.
[] Lock the switch trigger on the drill by placing the
direction of rotation selector in the center position.
[] Locate the latches on the side of the battery pack and
depress to release the battery pack from the drill.
[] Remove the battery pack from the drill.
BED LED
ORANGE LED
CHARGING STAND
Fig. 2
TO INSTALL BATTERY PACK
See Figure 3.
[] Lock the switch trigger on the drill by placing the
direction of rotation selector in the center position.
[] Place the battery pack in the drill. Align the raised rib
on the battery pack with the groove inside the drill.
CAUTION:
When placing battery pack in the tool,
be sure raised rib on battery pack aligns with the
bottom of the drill and latches into place properly.
Improper installation of the battery pack can cause
damage to internal components.
[] Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured in the
drill before beginning operation.
DEPRESSLATCHES TO
RELEASEBATTERY PACK
LMCHE8
Fig. 3
11