Chapter 4 Setting The Dip Switches - Epson TM-U300C Operator's Manual

Chapter 4 Setting the DIP Switches

n Finding the DIP switches
As shown in the illustration below, the DIP switches are located on the bottom of
the printer. The DIP switches are used to set the printer to perform various func-
tions
The TM-U300C/U300D DIP switches are numbered SW-1 to SW-10 and the
l
TM-U300PC/U300PD DIP switches are numbered SW-1 to SW-8, from left to right
as shown in figure below.
The tables on the following pages describes the DIP switch functions.
l
Setting the DIP switches
Follow these steps when changing DIP switch settings:
Turn the printer power switch off.
Flip the DIP switches using tweezers or another narrow-ended tool.
Switches are on when up and off when down in the figure below.
DIP Switches
The new setting takes effect when you turn on the printer.
NOTES:
Always change DIP switch settings when the printer is turned off.
l
Changes made with the power on have no effect until you turn the printer
l
off and then on again.
TM-U300PC/U300PD
23