Epson TM-U300C Operator's Manual page 13

n Connecting the host computer to the TM-U300PC/U300PD
Connect the interface cable as follows:
Turn off the printer and the host ECR (host computer).
Plug the parallel interface cable connector into the printer's interface connector.
Squeeze the wire clips together until they lock in place on both sides of the
connector.
Secure the frame ground cable and the shield wire of the parallel interface
cable with the frame ground screw on the bottom of the printer.
Plug the drawer kick-out cable connector into the printer's drawer kick-out con-
nector. (You can remove the drawer kick-out cable by pressing in the
connector's clip and pulling out the connector.)
rawer Kick-out Connector
Kick-out Cable
7