Epson TM-U300C Operator's Manual page 36

Ribbon cassette overall dimensions:
Figure A-1. ERC-38 Overall Dimensions
4. Roll Paper Supply Device
Supply method:
Near-end detector:
Roll paper core
l
inside diameter:
Near-end adjustment:
l
5. Roll Paper Take-up Device
The TM-U300C and TM-U300PC are equipped with a take-up device. The paper
is automatically taken up by the paper feed motor.
6. Paper
Paper feed method:
Paper feed pitch:
Paper feed speed:
Refer to Figure A-1
Paper roll holding shaft
Provided inside the printer case
The paper near-end detector location should be
adjusted by the user. Refer to section 3-3, Adjust-
ing the Paper Near-End Detector Location.
ø 10.5 to 12.5 mm (0.41" to 0.49")
Adjustable slider
Friction feed
Default 1/6 inch
Can be set in 1/144 inch units by software com-
mand.
Approx. 4.17 IPS (25 LPS) (continuous feeding)
(IPS: Inches Per Second)
(LPS: Lines Per Second)
30
[Units: mm]