Epson TM-U300C Operator's Manual page 26

Referring to the illustration below, set the position detector plate to the appropri-
ate position according to the adjustment position number from the table above.
TM-U300C/U300PC
NOTES:
1. Since the adjustment values in the Table 3-1 are calculated value, there may
be some variations depending on the printer.
2. If roll paper with a red end mark at the paper end is used, this mark may
cause the paper to stick together. If this occurs, the paper near-end detector
may operate incorrectly.
3. Be sure that the detecting lever operates smoothly after you finish the
adjustment.
4. If the roll paper becomes loose due to the paper quality, the paper near-end
detector may operate incorrectly.
TM-U300D/U300PD
20