Craftsman 320.26314 Operator's Manual

Craftsman 320.26314 Operator's Manual

20.0-volt lithium-ion cordless reciprocating saw


Operator's Manual
Reciprocating Saw
Model No. 320.26314
_IL WARNING: To reduce the risk
of injury, the user must read and
understand the operator's manual
before using this product.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page:
Save this manual for future reference


Table of Contents

Summary of Contents for Craftsman 320.26314

  • Page 1 CHARGE BATTERY understand the operator's manual BEFORE FIRST before using this product. Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: Save this manual for future reference...
  • Page 2 Exploded View and Parts List Pages 24-27 TWO YEAR LIMITED WARRANTY ON CRAFTSMAN® PROFESSIONAL TOOL If this Craftsman Professional Tool fails due to a defect in material or workmanship, return it to any Sears store, Sears Service Center, or other Craftsman...
  • Page 3: Symbol Meanings

    SAVE THESE INSTRUCTIONS! READ ALL INSTRUCTIONS! This tool has many features for making its use more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate. WARNING: Some dust created by using power tools contains chemicals known to the state of California...
  • Page 4 Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. DESIGNATION 1 EXPLANATION SYMBOL NAME Volts Voltage Amperes Current...
  • Page 5: Work Area Safety

    ,_k WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. The term "power tool" in all of the warnings listed below refer to mains-oper- ated (corded) power tools or battery-operated (cordless) power tools.
  • Page 6 Avoid accidental starting. Ensure the switch is in the off position before plugging in, Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. Remove any adjusting key or wrench before turning the power tool on.
  • Page 7 • Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation, if damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools°...
  • Page 8 Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion.
  • Page 9 SAFETY RULES FOR SAW Avoid damage that can be caused by screws, nails and other elements in your work piece; remove them before you start working. in case of electrical or mechanical malfunction, immediately switch off the tool. Use only accessories with an allowable speed matching at least the highest no-load speed of the toolo...
  • Page 10 WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. • Before using battery charger, read all instructions and cautionary mark- ings in this manual, on battery charger, battery and product using battery to prevent misuse of the products and possible injury or damage.
  • Page 11: Important Safety Instructions

    • Do not operate charger with a damaged cord or plug, which could cause shorting and electric shock. If damaged, have the charger repaired or re- placed by an authorized service technician at Sears Service Center. • Do not operate charger if it has received a sharp blow, been dropped otherwise damaged...
  • Page 12: Specifications

    • Work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles° Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling and other construction activities. Wear protective clothing and wash exposed areas with soap and water.
  • Page 13 KNOW YOUR RECIPROCATING SAW (Fig. 1) _IL WARNING; The safe use of this product requires an understanding of the information on the tool and in this product manual, as wel! as knowledge of the project you are attempting, Before use of this product, familiarize yourself with all operating features and safety rule&...
  • Page 14: Packing List

    Inspect the tool carefully to make sure that no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected satisfactorily operated the tool. If any parts are damaged or missing, return the product and packaging to the place of of purchase.
  • Page 15: Cold Weather Operation

    SmartChip BATTERY PROTECTION SmartChip intuitive circuitry protects the battery pack from extreme tempera- ture, over-discharge, and over-chargeo To protect the battery from damage and to prolong its life, the battery pack's SmartChip circuitry will turn off the battery pack if it becomes overloaded or if the temperature becomes too high during use.
  • Page 16 2o Attach the battery pack to Fig. 3 the charger by aligning the raised ribs of the battery pack with the slot in the char- get. Slide the battery pack onto the charger. (Fig, 3) The charger will communi- cate with the battery pack's SmartChip circuitry to evaluate the condition of...
  • Page 17: Battery Charging

    and the green LED will be off. When the battery warms to a temperature of more than 32°F (0°C), the charger will automatically begin charging. DEFECTIVE BATrERY If the charger detects a problem, the red LED will begin flashing and the green LED will be off.
  • Page 18: Trigger Switch

    TO ATTACH BATTERY PACK (Fig. 5) 1. Align the raised portion Fig, 5 on the battery pack with the grooves on the rear of the reciprocating saw, then attach the bat- tery pack to the tool as shown. Make sure the latch on the battery pack snaps into place and that the battery pack is secured to the saw...
  • Page 19: Electric Brake

    ELECTRIC BRAKE To stop the reciprocating saw, release the trigger switch and allow the tool to come to a complete stop. The electric brake quickly stops the saw from stroking. This feature engages automatically when you release the trigger switch. LED WORK LIGHT (Fig.
  • Page 20: Blade Selection

    REMOVING SAW BLADE (Fig.9) Fig. 9 Remove battery pack. Turn down the blade clamp lever. Remove the blade saw from the blade clamp. BLADE SELECTION To obtain the best perfor- mance from the saw, it is important to select the correct blade for the particular ap- plication and type of material you wish to cut.
  • Page 21: General Cutting

    ORBITAL ADJUSTMENT KNOB This saw has an orbital control with three positions that allows you to choose the best cutting action for your material, • Position 2 is for maximum orbital action (most aggressive). In general, the "2" position should be used when cutting soft materials. Position I is for less orbital action.
  • Page 22: Metal Cutting

    METAL CUTTING Metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper may be cut with the saw. Be careful not to twist or bend the saw blade. Do not force. The use of cutting oil is recommended when cutting soft metals and steel.
  • Page 23: For Recycling

    BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING To preserve natural resources, please recycle or dispose of batteries properly, This product contains lithium-ion batteries. Local, state or federal laws may pro- hibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
  • Page 24 20.0-Volt Lithium-Ion Cordless Reciprocating Saw. Model number 320,26314, The model number is also found on the tool's nameplate, Always mention the tool's model number when ordering parts. 3320414000 Right Housing 3320415000 Left Housing ,,,,,,, ,,,,,, 3'123019000 Lantern Ring 2730124000 DC Motor 3550724000 pinion 5610047000...
  • Page 25 3550785000 Bush 3550782000 Lock Pin 5650198000 Washer 3123021000 Gasket 5670146000 3550731000 Link 3520230000 Guiding Roller 3660295000 Spr!ng 5670147000 3520228000 Oil Impregnating Bearing 3703890000 Drive Bracket 3550730000 Shaft 3703834000 Plate Spring 3550786000 Screw Sleeve 3402189000 Pendulum Lever 3550784000 Bearing Support 569O137000 Seal Ring 3550737000 Plunger...
  • Page 26 3123265000 Left indictor Cover 3703854000 Front Hand,!e' ,SUpport ....3123023000 Front Handle 4890336000 PCB Assembly ... 2822264000 Pivot Shoe ,,,,, ,,, ..Button 3123267000 Switch 4870303000 3400260000 Contact Receptacle ASSY 5610097000 Thread Forming Screw 5610094000 Thread Forming Screw 26314 ManuaLRevtsed_07-0322 Page26...
  • Page 27 "1...
  • Page 28 Get it fixed, at your home or ours! Your Home For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold itl For the replacement parts, accessories and owner's manuals that you need to do-it-yourself_ For Sears professional installation of home appliances...

Table of Contents