Craftsman nextec 320.10004 Operator's Manual page 3

Some of the following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and more safely.
[."7'.._ _1 :l i'd li_[,._Jlil_tllO]ld[O _]_,.'.)
SYMBOL NAME DESIGNATION / EXPLANATION
v
A
Hz
W
min
,%,
no
[]
..Jmin
0
Volts
Amperes
Hertz
Watt
Minutes
Alternating Current
Direct Current
No Load Speed
Class II Construction
Per Minute
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed,
orbits t etc._ per minute
Do not expose to rain or use in damp
locations.
Wet Conditions Alert
To reduce the risk of injury, user must
Read the Product Manual read and understand product manual
before using this product.
Always wear safety goggles or safety
Eye Protection glasses with side shields and a full-face
shield when operating this product.
A Safety Alert Precautions that involve your safety.
(_ Failure to keep your hands away from
No Hands Symbol the blade will result in serious personal
injury.
Failure to keep your hands away from
No Hands Symbol the blade will result in serious personal
injury.
_) Failure to keep your hands away from
No Hands Symbol the blade will result in serious personal
injury.
Failure to keep your hands away from
No Hands Symbol the blade will result in serious personal
injury.
(_) To reduce the risk of injury or damage, Hot Surface avoid contact with any hot surface.
10004 Manual Revised_08-0813 Page 4
WARNING: Read and understand all instructions. Failure to follow all
instructions listed below may result in electric shock, fire, and/or serious
personal injury. The term"power tool" in all of warnings listed below refers to
corded power tools or battery-operated (cordless) power tools.
READ AND SAVE THESE INSTRUCTIONS
Know your Multi-Saw. Read the operator's manual carefully. Learn the
applications and limitations, as well as the specific potential hazards related
to this Multi-Saw. Following this rule will reduce the risk of electric shock, fire
or serious injury.
Use only the recommended battery pack and charger. Any attempt to
use another battery pack will cause damage to the Multi-Saw and it could
possibly explode, or cause a fire or personal injury.
Use the battery only with the charger listed:
BA'n'ERY PACK CHARGER
320.11221 320.10006
Remove the battery pack from Multi-Saw before performing any routine
maintenanceor cleaning.
Do not disassemble the Multi-Saw.
Do not place the Multi-Saw or the battery pack near fire or heat. They
may explode.
Do not dispose of a wom out battery pack by incinerating. Do not
incinerate the battery, even if it is severely damaged or completely worn out.
The battery may explode in fire.
Do not operate the Multi-Saw or the charger near flammable liquids or
in a gaseous or explosive atmosphere. Internal sparks may ignite fumes.
To reduce the risk of electric shock, do not put the Multi-Saw, battery, or
charger in water or otherliquid.Do not place or storethe productwhere it
can fall or be pulledinto a tub or sink.
Do not store the Multi-Saw in a damp or wet location. Do not store in
locations where temperature is less than 32°F (0°C) or more than 104°F
(40°C). Do not store outside or in vehicles.
Do not permit children to use the Multi-Saw. It is not a toy.
The Multi-Saw blade may become very hot after operating for only a short
period of time. This increased temperature can cause burn injury if touched
and can create sufficient heat to melt some fabrics.
10004 Manual Revised 08-0813 Page 5