Call Management - Altigen AltiServ TM 4.5 User Manual

Call Management

a
Feature Dial
Station Log Out #26
<pass-
word>
Station Log In #27
<ext>
<pass-
word>
Account Code #32
(before calling) <acct.
code>
Account Code FLASH
(during a call) (wait for
dial tone)
#32 <acct.
code>
Correct #31
Account Code <acct.
(during a call) code>
Do Not Disturb #33
/ Deactivate Do
Not Disturb
Call Forward- #36 <pass-
ing word>
<destina-
tion> #
Remote Call #37 <your
Forwarding ext>
<pass-
word>
a <ext> = extension num.; <nn> = 2-digit num.; <loc.> location
num.; <destination> = extension or complete phone number
20 AltiServ User Guide
Description
Deactivates or shuts off your extension, forward-
ing all calls to voice mail. This feature can be
used to move your extension from your phone set
to another phone set in the office.
Reactivates your extension at your original phone
set or another one. If using a different phone set,
that set must be deactivated for any prior exten-
sion.
#27 can also be used to hear the currently active
extension number for the phone set.
After entering the account code (a maximum of
ten digits), make the call when you hear the dial
tone. This feature can be used for client billing
purposes.
Press FLASH, wait for the dial tone, enter #32
and the account code followed by #. You will
then be reconnected to the call.
Changes the account code mid-call, replacing the
originally entered code.
Activates Do Not Disturb when it's off, deacti-
vates it when it's on. While activated, all calls are
forwarded to busy handling.
Forwards all calls to the destination, which can be
an internal extension or external phone number
including access code, long distance prefix and
area code. To deactivate forwarding, press #36
again, or deactivate from within the AltiGen
Voice Mail System.
When you're on a telephone station other than
your own, forwards your calls to the current sta-
tion. Multiple users can forward to the same
extension. Deactivate it by pressing #37 again on
the same phone set.