Macintosh System Requirements - Epson STYLUS Photo EX User Manual

Introduction
Note:
If you don't have a
CD-ROM drive, you can
get the printer driver
software on diskettes or
download it through your
modem. See your
Getting Started guide for
details.
At least 50MB of free hard disk space for storing images
(100MB recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed CD-ROM drive (quad-speed or faster
recommended)
A shielded, twisted-pair parallel printer cable (6 to 10 feet
long) to connect your computer to the printer; the cable
must have a D-SUB, 25-pin, male connector for your
computer and a 36-pin, Centronics
for the printer.

Macintosh System Requirements

To use your printer and its software with a Macintosh, your
system should have:
Any Macintosh or Power Macintosh model except early
models such as the Macintosh Classic, Macintosh +,
Macintosh 512, or PowerBook
System 7.1 or later (7.5 or later recommended)
At least 16MB of built-in RAM (20MB recommended)
At least 50MB of free hard disk space for storing images
(100MB recommended)
13-inch RGB or better display
Double-speed CD-ROM drive (quad-speed or faster
recommended)
®
Standard Apple
(RS-422, 8-pin mini DIN male/male, Belkin F2V024
recommended)
2
®
compatible connector
™
100
System Peripheral-8 cable or equivalent