Installing The New Cartridge - Epson STYLUS Photo EX User Manual

Maintenance and Transportation
Caution:
You must remove only
the yellow tape seal from
the top of the cartridge;
leaving the tape on will
permanently damage it.
Do not remove the clear
seal from the bottom of
the cartridge; ink will leak
out.
Warning:
If ink gets on your hands,
wash them thoroughly with
soap and water. If ink gets
into your eyes, flush them
immediately with water.

Installing the New Cartridge

Once you have removed the empty cartridge, you're ready to
install the new one. Follow these steps:
1. Remove the new ink cartridge from its packaging.
2. Remove only the yellow part of the tape seal on the top of
the cartridge. Do not remove the white part. (It's OK if the
tape does not tear off exactly along the dotted line.)
Don't remove
black cartridge
3. Lower the ink cartridge into its holder with the label facing
up and the arrow pointing to the back of the printer. The
larger cartridge (color) goes on the right, the black ink
cartridge on the left.
5-6
Don't remove
Remove
color cartridge
Remove