Epson STYLUS Photo EX User Manual page 17

Epson stylus photo ex user manual
Hide thumbs Also See for STYLUS Photo EX:
Table of Contents

Advertisement

Introduction
Place the printer near a wall outlet where the plug can be
easily unplugged.
Placez l'imprimante près d'une prise de contacte où la fiche
peut être débranchée facilement.
Do not let the power cord become damaged or frayed.
If you use an extension cord with the printer, make sure
the total ampere rating of the devices plugged into the
extension cord does not exceed the cord's ampere rating.
Also, make sure the total of all devices plugged into the wall
outlet does not exceed 15 amperes.
Except as specifically explained in this User's Guide, do not
attempt to service the printer yourself.
Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered
the printer; if the printer has been dropped or the cabinet
damaged; if the printer does not operate normally or
exhibits a distinct change in performance. Adjust only those
controls that are covered by the operating instructions.
Even if you are familiar with other types of printers, be sure to
read through the following list of precautions before operating
your ink jet printer:
Do not put your hand inside the printer or touch the
cartridge during printing.
Under normal circumstances, ink will not come out of the
cartridge. If it does get on your skin, wash it off with soap
and water. If it gets in your eyes, flush them immediately
with water.
Keep ink cartridges out of the reach of children.
Do not dismantle the ink cartridges or try to refill them.
This could result in damage to the print head.
Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one.
The cartridge may become unusable otherwise.
8

Advertisement

Table of Contents
loading

Table of Contents