Accessories Ink Cartridges Cartridge printer cover Black control Color panel Media Media name EPSON 360 dpi Ink Jet Paper EPSON High Quality Ink Jet Paper EPSON Photo Quality Ink Jet Paper load/eject EPSON Photo Quality Glossy button Paper paper out...
51.4 (W) 38.5 (H) mm 38.5 (H) mm Caution: EPSON recommends the use of genuine EPSON ink cartridges. Other products not manufactured by EPSON may cause damage to your printer not covered by EPSON’s warranties. Do not use an ink cartridge if the date on the package has expired.
Page 3
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, EPSON cannot attest to the quality of any non-EPSON brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Page 4
The minimum top margin is 0.12 inch (3.0 mm). When loading multiple sheets of EPSON Photo Quality Film, the minimum top margin is 1.2 inches (30 mm). B-L, B-R: The minimum left and right margins are 0.12 inch (3.0 mm).
Approx. 5.5 W in standby mode (220 240 V model) * This product is also designed for an IT power system phase-to- phase voltage of 220 240 V. ** Check the label on the back of the printer for the voltage of your printer. Environmental Temperature Operation 50 to 95 °F (10 to 35 °C)
Only the nozzle check pattern is shown below: 5. After it prints the page, turn off the printer. Remember to reconnect the interface cable, then turn on the printer and your computer.
For better results, load EPSON Photo Quality Glossy Film one sheet at a time. This also allows you to use a smaller top margin. Additional Media Loading Guidelines...
When the light stays on, the cartridge is empty and you need to replace it. You cannot print if either ink cartridge is empty. Use these EPSON ink cartridges within six months of installing them and before the expiration date on the package: Black ink cartridge: S020093...
Using the Head Cleaning Utility Follow these steps to run the utility: 1. Make sure the printer is turned on but not printing, and the B black and A color ink out lights are off. 2. Access the printer settings dialog box.
5. Follow the instructions on the screen to print a test page and select the correct alignment. Note: For best results, use EPSON ink jet paper or photo quality paper when you check the print head alignment. Cleaning the Printer Caution: Don’t touch the gears inside the printer.