Font Command - Xerox DocuPrint 96MX Forms Creation Manual

FONT command

Specifying fonts
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS FORMS CREATION GUIDE
The FONT command identifies the character sets to use when
creating and printing forms data and variable data. Fonts must be
selected using the FONT command before text can be specified.
FONT can be used only once. The command has the following
format:
FONT [S] id[. . . id];
id Identifier of the standard or custom font you want to use. The number
of fonts that can be specified depends on their size, the number of
fonts used in the variable data, and the size of font memory in your
system. However, the maximum number of fonts and logos allowed
per form by the forms compiler is 32.
Note: Multiple ids are separated by either a blank or comma.
Example:
FONTS UN106A,UN104C,UN114A;
FORMS DESCRIPTION LANGUAGE
3-15