Xerox 4219/MRP Operator's Manual page 29

XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE
4. Enter the fax destination telephone number in the Fax
Number field and press Enter.
The number you enter is dialed after the outside line prefix
you optionally specified during fax utility software installation.
You may add outside access codes before the phone number
if you want to use them for this fax only, or if they were not
specified at installation.
The fax software recognizes the following characters as
access codes:
Code
0 through 9
* and #
W
, (comma)
[ ]
Note: You can enter other numbers from the
N
Advanced Fax Options menu to override the numbers
entered during the installation program.
5. You can select whether or not to send a cover page. If you
want to exclude the cover page, press F10 and skip to step
11. If you wish to send a cover page, select Yes in the
Cover Page field and press Enter.
The Fax Cover Page screen appears:
Function
Dialing numbers
Sound the tones corresponding
to these keys on tone telephones
Wait for dial tone
2 second pause
Square brackets protect internal
accounting codes, credit card
numbers, and so forth. Any
number placed within the square
brackets gets dialed, but does not
appear on the fax cover sheet or
header.
OPERATION
2-3