Setting Advanced Options With Install/A; Running The Install/A Program; Printing And Editing Internal Settings - Xerox 4219/MRP Operator's Manual

Setting advanced options with INSTALL/A

Running the INSTALL/A program

Printing and editing internal settings

XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE
4. Do one of the following:
If you use automatic loading, reboot the computer to
•
load the fax software with the new settings.
or
If you do not use automatic loading, reboot to unload
•
the software and type \PSFAX\PSFAX from the MS-DOS
prompt to load your new settings.
The advanced install program (INSTALL/A) is used to change
some of the internal settings for the fax printer, as well as some
of the advanced settings for the fax software.
INSTALL/A can do the following:
Print fax printer settings
•
Edit fax printer settings
•
Edit timeout settings
•
Edit printer port redirection
•
Edit fax printer password.
•
At the MS-DOS c: command prompt, type \PSFAX\INSTALL/A (or
use the appropriate path for your fax software installation).
The Advanced Installation Options screen appears:
The printer has a number of internal settings that are stored in its
non-volatile RAM memory (NVRAM). You can use INSTALL/A to
do the following:
Produce a Fax Settings Page showing your current settings
•
Change the current settings.
•
Follow these steps to print a settings page:
1. Make sure your printer is on and on-line.
ADMINISTERING THE FAX SOFTWARE
3-3