Changing The Windows Installation; Loading The Fax Software In Ms-Dos - Xerox 4219/MRP Operator's Manual

Mrp family fax modem for ms-dos
Hide thumbs Also See for 4219/MRP:
Table of Contents

Advertisement

INSTALLATION

Changing the Windows Installation

Loading the fax software in MS-DOS

1-12
dialog box from appearing when you print if you install the
optional Fax Control Panel icon in one of the Windows program
groups. You can then click on the icon to access the Fax
Control Panel and turn the fax software on or off in Windows.
To install the Fax Control Panel in Windows, follow this
procedure:
1. Run Windows and open the Windows Applications group (or
other program group in which you want the Fax Control
Panel icon to appear).
2. Select NEW from the File menu.
3. Select Program Item in the New Program Object window and
then click on OK.
4. Enter the name you want to see under the icon in the
Description field of the Program Item Properties window.
5. Enter the complete path to the PSFAXCTL.EXE program
located in the fax software directory, into the command Line
field, and click on OK. The complete path is usually
C:\PSFAX\PSFAXCTL.EXE.
The Fax Control Panel icon now appears in the Windows
Applications group, or other group you chose.
6. Double click on this icon to access the Fax Control Panel.
Some systems may require you to press Alt+Esc prior to
double-clicking on the Fax Control Panel icon, or it will not
open.
7. Select the appropriate Fax Control Panel option:
ON
Enables the Fax or Print Dialog box in Windows.
OFF
Prevents the Fax or Print Dialog box from appearing
when you execute a Windows print command.
If you want to remove the fax software from the Windows
environment, follow the procedures in the "Administering the fax
software" chapter.
Do not attempt to undo the changes the install program made to
your Windows files.
Do not delete the fax software files from the Windows directory.
The fax software must be enabled and loaded into memory
before using it to send a fax from MS-DOS applications.
Selecting the Automatic Loading Feature during the install
program changes the AUTOEXEC.BAT file to automatically load
the fax software when you reboot your computer. In order to
use the software after installation, reboot your computer.
To load the fax software manually from the MS-DOS prompt,
follow the steps below. If you did not install the software in the
C:\PSFAX directory, use the correct drive and directory name.
1. Type: C:\PSFAX\PSFAXQ and press Enter.
XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

4220/mrp4230/mrp4215/mrp

Table of Contents