Printer Configuration Report - Xerox 4219/MRP Operator's Manual

TROUBLESHOOTING
Fax Setup Menu error messages
INVALID WITH PAPER SIZE IN TRAY n
1. CONTINUE
0. EXIT TO PREVIOUS STEP
= Input paper tray 1, 2, 3, or 4
n
INVALID--TRAY 5 WITH OUTPUT DESTINATION
SELECTION. TO RETURN PRESS <CLEAR>.
INVALID--PAPER SIZE IN TRAY n WITH
OUTPUT DESTINATION. TO RETURN <CLEAR>.
= Input paper tray 1, 2, 3, or 4
n

Printer Configuration Report

5-6
Table 6-1. Fax Setup menu error messages (continued)
Result/Reason
An output destination is
selected (high-capacity
stacker) that cannot accept
output from the input tray
already selected.
You have attempted to exit
the Main Menu without
resolving the conflict between
Tray 5 as the default input tray
which conflicts with the
output destination selection
(top tray or high-capacity
stacker).
You have attempted to exit
the Main Menu without
resolving the conflict between
the output destination
selected (top tray or high-
capacity stacker) that cannot
accept the size from the input
paper tray selected.
The Hardware Status section of the Printer Configuration Report
reports the following information on the status of the fax
modem:
When the fax modem is installed and working properly,
•
"Installed" is reported.
When not installed, "Not Installed" is reported.
•
If the fax modem has failed, "Failed" is reported.
•
XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE
Action
Use Scroll keys or direct
scrolling to:
[1] continue-- invalid entry is
not changed. You can
continue to make changes to
the Fax Setup, but you must
resolve this conflict before
exiting the menu.
[0] exit to the previous step
to select another output
destination that can accept
the output from the currently
selected input paper tray.
Press the Clear/C key. You
are returned to the top of the
Fax Setup menu to select a
different input paper tray or
output destination.
Press the Clear/C key. You
are returned to the top of the
Fax Setup menu to select a
different input paper tray or
output destination.