Advertisement
Product: 8700 MICR
Section V - Emission/Exposure Information*
Light Source
Laser-Class 3B System/Class 1 Product.
Light Path is internal to the printer and shielded to prevent light leakage or direct viewing.
Meets BRH requirements for operator safety.
Electromagnetic Emissions
FCC/DOC: Class/Level A
Audible Noise
75.2 db
Ozone**
0.009 ppm
Total Dust**
0.04 mg/m
Selenium
Arsenic**
3
0.3 ug/m
Tellurium
* TLV (Threshold Limit Value) and PEL (Permissible Exposure Level) respectively set by American Conference of
Government Industrial Hygienists and by Occupational Safety and Health Administration. These levels are
considered maximum exposure permitted to ensure no health hazard. TWA (Time Weighted Average) for a
normal eight hour workday.
** Emissions data taken in a 28 m
Customer operator exposure level to be lower than levels noted. Emissions data taken from the 9700 MICR
Emissions Report.
All measurements were made on products performing within established operating specifications and received
recommended maintenance procedures. Xerox certifies that this product meets or exceeds the applicable standards for
safety and emissions.
3
3
room with 1/2 room change per hour for service personnel exposure only.
PSDS No.: 0800B
TLV
85 db (A)
TLV:
0.1 ppm
TLV
3
10 mg/m
TLV
PEL
3
10 ug/m
TLV
Advertisement
