Monitoring And Controlling Printing; Highlight Color Printing - Xerox DocuPrint Network Printer Series Client Manual

SUBMITTING PRINT JOBS USING MACINTOSH DRIVERS

Monitoring and controlling printing

Highlight color printing

4-38
The following window displays:
You can monitor and control printing from the Print Monitor
application, which shows:
•
documents printing and the printer name
•
documents waiting to print
•
documents scheduled to print at a specified time
•
documents that will print when you schedule them.
When you begin printing, the PrintMonitor becomes active and its
icon blinks, alternating with the Applications icon. To monitor print
jobs, open the print monitor by double-clicking the PrintMonitor, or by
clicking the PrintMonitor option from the Applications icon pull-down
menu.
Note: This section applies to models 4850/4890/92C NPS
only.
Models 4850 NPS, 4890 NPS, and 92C NPS allow you to print text
and graphics using black and color dry ink.
The highlight color print process combines pixels of black, white, and
the highlight primary color, resulting in an image that resembles a
halftone. Because the process requires only one pass, so it is faster
than print processes that mix three or more colors. This process
produces high-quality images without distorting line thicknesses.
DocuPrint software provides conversion of full-color documents to
highlight color. When you send a full-color document to DocuPrint,
the printer "reads" any pigments corresponding to the highlight color
and prints them in shades of that color. The other colors print in
shades of gray.
GUIDE TO SUBMITTING JOBS FROM THE CLIENT