intended Use
Detail Sanding
Sanding in extremely tight areas otherwise difficult to reach and require hand sanding.
Select a high oscillating frequency. Sand with continuous motion and light pressure.
Applying excessive pressure does not increase material removal; but will prematurely
wear sanding sheets.
Flush Cutting
Remove excess wood from door jamb, window sill and/or toe kick. Removing excess
copper or PVC pipe.
Removal
Work
Carpets & backing, old tile adhesives, caulking on masonry, wood and other surfaces.
Removal
of Excess
Materials
Tile grout, plaster, mortar splatters, concrete on tiles, sills.
Preparation
of Surfaces
New floors and tiles.
SAVE THESE INSTRUCTIONS
Functional
Description
A) On/Off switch
B) Variable speed dial
C) Power cord
D) Clamp washer
BD200TMT
E) Bolt
F) Hex wrench
G) Tool-Free Release
Included with BD200TMT
BD200MT