JVC HX-D7 Instructions Manual page 81

4 Select the repeat mode you want.
ALL Repeats all discs.
A-B Repeats a desired portion (see
page 28).
TITLE Repeats the current title.
GROUP Repeats tile current group.
DISC Repeats the disc.
CHAPTER Repeats the current chapter.
TRACK ':_ Repeats tile current track.
OFF Cancels Repeat Play.
* During Program Play or Random Play, "STEP"
appears.
• Repeat modes depend oil the current playback disc.
Refer to page 25.
5 Finish the setting.
Pop-up window goes oft'.
Select the end point (B).
A-B Repeat starts. The selected
portion plays repeatedly.
• Before pressing ENTER, you call
search for the end point using I_.
Time Search
You call move to a particular point by specifying tile elapsed
playing time from the beginning.
1 While playing (without PBC for SVCD/VCD), display
the on-screen bar with the pull-down menu.
• Except for DVD: Time Search call be used belore
starting playback.
2 Select I_g].
3 Display the pop-up window.
To cancel Repeat Play, select "OFF" ill step 4.
To erase the on-screen bar
A-B Repeat
1 While playing, display the on-screen bar with the pull-
down menu.
2 Select _.
3 Display the pop-up windows.
4 Select "A-B."
Enter the time.
You call specify the time ill hours/minutes/seconds.
_¢:, !_ Examples:
i_ '_'"_"_'i To move to a point of 1
® (hours): 0 (minutos): oo
i _,: (seconds), press 1,0, 2, 0,
then 0.
To move to a point of 54
(minutes):
O0 (seconds),
press 0, 5, 4, 0, then 0.
• It is always required to enter the hour digit (even "0"
hour), but it is not required to enter trailing zeros (the
last two digits in the examples above).
• To correct a misentry, press cursor < to erase the last
entry.
Finish the setting.
Tile System starts playing from
the specified time.
A-B
5 Select the start point (A).
To erase the on-screen bar
28