JVC HX-D7 Instructions Manual page 21

_ha_gi_g t_B S_a_nii_ NOde
This System supports progressive scanning.
If you connect a progressive TV through the COMPONENT
jacks, you call enjoy a high quality picture from the built-in
DVD player by selecting "PROGRESSIV."
.. PROGRESSIV
(5_m INTERLACE
"iX "':÷
PROGRESSIV
Progressive scanning. For a
progressive TV.
• PRGR. indicator lights oil when
progressive scanning mode is
selected.
INTERLACE Interlaced scanning. For a
convemional TV.
i:nO theN:c
;>>
While showing a playback picture on the TV, you call select
the preset picture tone, or adjust it and store your own
preference.
Toselect a preset picture tone
1
Activate VFP.
VFP
To adjust the picture tone
1
Select "USERI" or "USER2."
• Follow steps 1 and 2 explained above.
2 Select a paz'ametez" you want to adjust.
GAMMA A(ljust if tile neutral color is bright or
dark. The brightness of dark and
bright portions is maintained
(-3 to +3).
BRIGHTNESS A([just if tile picture is bright or dark
as a whole ( 8 to +8).
CONTRAST Acliust if tile far and near position is
unnatural (-7 to +7).
SATURATION A(liust if tile picture is whitish or
blackish ( 7 to +7).
TINT A(liust if the human skin color is
unnatural (-7 to +7).
SHARPNESS At[just if tile picture is indistinct
( 8 to +8).
3
Adjust the parameter.
4 Repeat steps 2to 3to adjust other parameters.
5 Finish setting.
VFP
On the TV screen
2
Select a preset picture tone.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You call adjust parameters and call
store the settings (see tile next
colunm).
18