Usingthe Timers; Usingdaily Timer; Timer Recording - JVC UX-M6V Instructions Manual

Usingthe Timers Continued I_
There are three timers available -- daily timei; recording
timer mad sleep timer.
Before using the timers, you need to set the built-in clock.
(See page 8.)
UsingDaily Timer
With the daily" timei; you cma wake to your favorite music or
radio program.
Howthe daily timer actuallyworks
At the timer-on time, the unit automatically" turns on, sets the
volume to the preset level, mad stai_s playing the specified
source (radio or CD). During play, the TIMER "ON"
indicator flashes. Then, at the timer-off time, the unit
automatically turns off (on standby).
The timer setting remains in memory until you chmage it.
• There is a time limit in doing the following steps. If the
setting is cmaceled before you finish, stai_ fi:om step 1
again.
Press and hold TIMER ON/
OFF SET (or TIMER on the
remote control) until the
TIMER indicator lights up and
a source name appears on the
display.
TIMER _%
or_
$$r
• At this point you cma view the previous setting by pressing
or _ repeatedly.
2 Press PROGRAM. ._._
"TUNER," "TAPE," "CD" or "REC TU" stm_s L('3J,J
blinking.
3 Press !.,_l.q or _ to select the
desired source, then press
PROGRAM.
If "TUNER" or "REC TU" is selected,
press TUNER to select the current radio
station or press _ or _ to select a
desired preset radio station, then press
PROGRAM to confiiTn the selection.
SEARCHffUlllh]G
I_11-1
P_OGRAM
"VOL" appears mad the volume level stai_ blinking.
4 Press !.,_l.q or _
to set the volume, then
press PROGRAM.
The ON indicator madthe hour indication stai_ blinking.
5 Press !.,_l.q or _
to set the timer start hour,
then press PROGRAM.
6 Press !.,_l.q or _ to set the minute, then
press PROGRAM.
The OFF indicator m_dthe hour indication stai"tblinking.
7
Set the time to stop playback following the
same procedure as steps 5 and 6.
"TIMER OK" appears on the display" briefly mad the timer
is now set.
Press TIMER ON/OFF SET (or
TIMER on the remote control) to
activate the timer.
The TIMER indicator lights up.
"nrdER _%
ON_FF
SET
Turn off the unit (on standby).
When the preset time is reached, the
selected source is played if the timer has
been activated.
STANDBY
iON
To deactivate the timer, press TIMER ON/OFF SET (or
TIMER on the remote control).
The TIMER indicator disappears.
, The timer-off function is not activated if the stm_ing mad
stopping times m:e the same.
, If the selected source (CD or TAPE) is not available when
the preset time is reached, TUNER is selected
automatically.
Timer Recording
You can use the recording timer to record a preset radio
station fl'om a specified time mad for a specified duration
automatically.
1 Load a recordable tape into the tape deck.
, If desired, select the tape reverse mode option.
2 Follow the "Using Daily Timer" procedure on
the left. Select "REC TU" as the source for
timer recording.
• If the preset time is reached while the unit is on, the timer
is not activated for timer recording.
• The recording timer is cmaceled once the recording is
finished.
- 20 -