Table of Contents
Advertisement
- When the product is used on a cart, care should be taken to avoid quick stops, excessive
force, and
uneven surfaces which may cause the product and cart to overturn,
damaging
equipment
or causing
possible injury to the operator.
- Slots and openings
in the cabinet are provided for ventilation.
These ensure reliable operation
of the
product and protect it from overheating.
These openings
must not be blocked or covered. (The openings
should never be blocked by placing the product on bed, sofa, rug, or similar surface. It should not be placed in a built-in
installation
such as a bookcase
or rack unless proper ventilation
is provided and the manufacturer's
instructions
have
been adhered
to.)
For proper ventilation,
separate the product from other equipment,
which may prevent ventilation
and keep distance
more than 10 cm (3 W16inches).
- This product should be operated
only with the type of power source indicated on the label. If you are not sure of the
type of power supply to your home, consult your product dealer or local power company.
- This product is equipped
with a three-wire
plug. This plug will fit only into a grounded
power outlet. If you are unable to
insert the plug into the outlet, contact your electrician
to install the proper outlet. Do not defeat the safety purpose of
the grounded
plug.
- Power-supply
cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. Pay particular
attention to cords at doors, plugs, receptacles,
and the point where they exit from the
product.
- For added protection
of this product during a lightning storm, or when it is left unattended
and unused for long periods
of time, unplug it from the wall outlet and disconnect
the cable system. This will prevent damage to the product due to
lightning and power line surges.
- Do not overload wall outlets, extension
cords, or convenience
receptacles
on other equipment
as this can result in a
risk of fire or electric shock.
- Never push objects of any kind into this product through openings
as they may touch dangerous
voltage points or short
out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
- Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous
voltages
and other hazards. Refer all service to qualified service personnel.
- Unplug this product from the wall outlet and refer service to qualified service personnel
under the following
conditions:
a)When
the power supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen on the product.
c) If the product has been exposed
to rain or water.
d) If the product operated
normally
by following the operating
instructions.
Adjust only those controls that are covered
by the Operation
Manual, as an improper
adjustment
of controls
may result in damage and will often require
extensive
work by a qualified technician
to restore the product to normal operation.
e) If the product has been dropped
or damaged
in any way.
f) When the product exhibits a distinct change in performance
- this indicates
a need for service.
- When replacement
parts are required,
be sure the service technician
has used replacement
parts specified
by the
manufacturer
or with same characteristics
as the original part. Unauthorized
substitutions
may result in fire, electric
shock, or other hazards.
- Upon completion
of any service or repairs to this product, ask the service technician
to perform safety checks to
determine
that the product is in proper operating
condition.
- The product should be placed more than 30 cm (11 15/16 inches) away from heat sources such as radiators,
heat
registers, stoves, and other products (including
amplifiers)
that produce heat.
- When connecting
other products such as VCR's, and personal computers,
you should turn off the power of this product
for protection
against electric shock.
- Do not place combustibles
behind the cooling fan. For example,
cloth, paper, matches,
aerosol cans or gas lighters
that present special hazards when over heated.
- Use only the accessory cord designed for this product to prevent shock.
- Do not touch the handles on the rear soon after many hours of continuous
use. They are so hot and will cause a burn
on the hand. If you need to touch the handles,
for example,
to move the product, wait until the handles are cooled
enough.
- Z_ Option terminal:
This terminal
is intended exclusively
to be used to drive the fan motor.
Do not connect any plugs to the terminal other than JVC's recommended
optional parts.
(_;}_Oe_(_
Polarity of terminal
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V.
The power cords attached conform to the following power supply voltage and countries.
Use only the power cord designated to ensure Safety regulations of each country.
For U.S.A. and Canada: AC 120 V
3
Advertisement
Table of Contents
