Table of Contents
Advertisement
iflstall
on
* When mounting the Monitor
vertically,
consult your dealer. (See also page 13).
* When installing
the Monitor, be sure to use a dedicated
Stand Unit, Wall Mounting
Unit, or Monitor
Hanger
Unit, depending
on a particular
case. Ask your dealer for installation.
* When installing
the Monitor,
refer also to the user manual
for each option to use. Do not tilt the Monitor
rightward,
leftward,
or backward.
* Route the power cord and connection
cables along wall or floor corners
to avoid walking
on them.
* For good heat dissipation,
try to leave the following
distances
of space (minimum)
around
the Monitor.
* The ambient
temperature
of the installation
place should be within the range of 0°(_"to 40°(_` (slightly variable depending
on
ambient conditions
for installation.)
* When installing
the Monitor
in a place, such as near the ceiling, the remote control may not work correctly
because of possible
effects from the surroundings.
]ifthis happens,
use the remote control as a wired remote control or move the Monitor
where it
is free from these effects.
When installing
the Monitor
on a stand
Front View
Side View
200
(77/8)
50
(2)
Unit: mm (inch)
When mounting
the Monitor
on the wall
Front View
Side View
50
(2)
When hanging
the Monitor
from
the ceiling
Side View
50(2)
>i
200 f II
(77/+) _ i
Unit: mm (inch)
Notes:
* 19o not allow the same image (pattern)
to be continuously
displayed
on the screen for a long time; otherwise,
the area on the
screen corresponding
to the image may vary in brightness,
leaving an afterimage
on the screen. 'R>reduce the afterimage,
you
can use the Refresh function (see page 31 ).
* The Monitor
is manufactured
using very high-precision
technology,
allowing
for more than 99.99% active pixels, however,
be
aware that only a slight number
of pixels may be deficient
or lit at all times.
* Do not install the Monitor
in such a way that the Monitor
and other AV equipment
affect each other adversely_ (For example,
if a disturbed
image or noise due to electromagnetic
interference
occurs, or if the infrared
remote control malfunctions,
change
the installation
place.)
9
Advertisement
Table of Contents
