JVC GM-V42UB Instructions Manual page 38

Plasma display monitor
Hide thumbs Also See for GM-V42UB:
Table of Contents

Advertisement

STATU S DISPLAY
CON FROL LOCK
REMOTE SWI FCH
HD SIGNAL MODE
WHI/'E BALAN CE
TIMER
PIXEL SHIFT
POWER SAVE
COLOR-REVERSE
REFRESH
reset
all reset
HOUR ME 17ER
MODEL NAME
Sets if you want the input terminal
and the type of signal to be indicated
on the screen just after
inputs
are switched.
(See page 25.)
Sets the Monitor
so that it cannot be operated
with the buttons
on itself. (See page 26.)
Set the selectable
input terminals
when controlling
the Monitor
with the external
control unit (See
page 27.)
Select the High-Definition
(HD) signal type. (See page 27.)
Adjusts
R GAIN, G GAIN and B GAIN finely each for "HIGH"
and "LOW" settings
of the color
temperature.
(See page 19.)
Sets the clock and the Power On/Off
Timer. (See page 28.)
Sets a screen saver. (See page 29.)
Sets the power save function.
(See page 29.)
Use to reverse the color of the still picture
to prevent
its afterimage
from being left on the screen.
(See page 30.)
Use to eliminate
afterimages
on the screen. (See page 31 .)
Resets the Setup Menu settings
to defaults.
(See page 33.)
Resets the all menu settings
and adjustments
to defaults.
(See page 33.)
Use to confirm
the hours of use. (See page 25.)
Use to confirm
your model name. (See page 25.)
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gm-v42ug

Table of Contents