Table of Contents
Advertisement
SQUEEGEE ASSEMBLY
Before and during use of machine, use a damp cloth to wipe
the outside and inside of squeegee to remove buildup of for-
eign material on the squeegee blades. This prevents streaking
and residue on the floor.
Squeegee wear:
After extended use, the squeegee blades will wear. To im-
prove squeegee performance and extend wear, proceed as
follows:
1.
Turn off all switches and place the machine
on a level surface. Raise the squeegee to
the transport position.
2.
Loosen knobs on the left and right hand
sides of squeegee until squeegee can be
removed from the squeegee bracket.
3.
Loosen the fasteners on front of squeegee
to replace or adjust front blade.
4.
Unlatch rear squeegee latch to replace rear blade.
1.
Lower the squeegee and move the machine
forward.
Observe the level of the squeegee for an
2.
even curl along the length of the blade. Use
camber adjustment knob to achieve even curl if
required.
3.
Adjust the down pressure nut located on squeegee
mounting assembly. Do not apply excessive force.
SQUEEGEE DEFLECTION
ber
knob
MAINTENANCE
INCORRECT
NOTENOUGH
TOO MUCH
Hide quick links:
Advertisement
Table of Contents
