Sanyo WXU700 - WXGA LCD Projector Owner's Manual page 147

Infrastructure Mode:
When selecting Wireless 5 (factory default setting)
Check each item below in the Wireless Setting menu of the projector as follows:
*IP Address .............................. No setting is required.
*Sub net ................................... Should be the same as the setting of the access point
*Gateway ................................. Should be the same as the setting of the access point
*Network Type ....................... Should be the Infrastructure mode
*ESSID/SSID............................. Should be same as the setting of the access point
Check the settings for projector Client computer
*IP Address ...............................No setting is required. Automatically set as DHCP.
*Wireless Channel ..................Should be 11
*ESSID/SSID... ............................Should be the same as the setting of the access point
*WEP ...........................................Should be disabled.
* When Wireless 5 is used, it is necessary DHCP server is under the environment enabling
those servers communicate through networks. Some access points may have the DHCP
function. For detail of the settings, refer to the owner's manual for the devices or consult a
system administrator of the network.
Is the segment where the projector is installed different from the computer?
Specify IP Address directly on the optional setting. Refer to "4. Wired LAN Configurations" ➔
"Confirming the Operation" (+p.30–31).
■ Connection between computer and the projector via Wired LAN cannot be established.
When selecting LAN1 (factory default setting)
Check IP address, Sub net and Gateway of the projector and computer. For further details of the
configuration, contact your system administrator.
Is the segment where the projector is installed different from the projector?
Specify IP Address directly on the optional setting. Refer to "4. Wired LAN Configurations" ➔
"Confirming the Operation" (+p.30–31).
■ Cannot start up the browser
Is the connection between PC and the projector with Network Capture 5 established?
No ................ Check settings for Wireless/Wired LAN.
Yes ............... Check settings of the proxy setting at browser. Refer to "Web browser setting"
(p.138).
Troubleshooting
1