Table of Contents
Advertisement
GETTING
STARTED
Step 3e. Digital 8VSB Cable/Analog
Cable with DTV-Compatible
TV
Follow this diagram if you have a DTV-compatible TV, cable service providing 8VSB
digital cable and you want to receive digital cable channels through the STB and
analog cable channels through the cable box (or through the TV if you have no cable
box).
Note:
The STB is able to receive DTV signals from your local cable provider only if they are
transmitted
in the
8VSB
modulation
format
approved
by
the
FCC
for DTV
transmission.
Also, your cable provider may elect to transmit in the 8VSB format for
only a limited period of time.
Please contact your cable provider to determine if
8VSB modulation is available.
Analog Signal
Optional Cable Box
8VSB Signal I
SPLITTER
ANT
IN
ANT
OUT
DTV-CompaUbleTV
DIGITAL
TV
INPUT
I'-"-1
=0 0°.'
STB
NOTE:
ANTENNA,
SPLITTER,
CABLE
BOX, RF CABLES AND AUDIO CABLES
NOT INCLUDED
[]
ANT
........ "ix,
MODE
.
I
R-AU DIO-L
DEO S VIDEO
ALL ATSC
_
r_l
DIGITAL
K_'_
0U'_'_"
FORMAT
S
480p
DIGITAL
AUDIO OUT
480p,1080i
INTERFACE
(AC-3)
J
L
=//
DIGITAL 8VSB CABLE/ANALOG
CABLE RECEPTION WITH
DTV-COMPATIBLE TV SETUP
Procedure
•
Connect the cable wire from the wall jack to the splitter using a standard RF cable with
coaxial connectors.
•
Connect one splitter output to the STB ANT (antenna) IN jack using a RF cable.
•
If using a cable box, connect the other splitter output to the cable box ANT (antenna) IN
jack using a RF cable.
Connect the cable box ANT (antenna) OUT jack to the DTV-
compatible TV ANT (antenna) IN jack using a RF cable.
•
If not using a cable box, connect the other splitter output to the DTV-compatible TV ANT
(antenna) IN jack using a RF cable (not shown).
•
Follow directions in Getting Started section to connect the STB to a DTV-compatible TV.
Advertisement
Table of Contents
