Adjusting The Print Position - Epson Stylus 800 User Manual

N o t e :
U The printer has a minimum and maximum loading position. If
you try to move the loading position beyond these limits, the
printer beeps and the
When the
printer beeps. Use the factory setting as a reference point
adjusting the loading position.

Adjusting the print position

The print position is the position on the page where the print
head actually prints during a print job. If you want to change
the current print position, you can use the micro-feed feature as
follows:
1. Press the PAUSE button to stop printing; the PAUSE light
comes on.
2. Hold down the ALT button and press the ECONOMY/
CONDENSED (up) or FONT (down) button to adjust the
print position on the page.
3. Press the PAUSE button again to resume printing. (You may
have to experiment a few times to get the results you want.)
N o t e :
The printer has a limit - 8.0 mm (0.31 inch) - to the amount you
can move the print position backwards using microfeed. Feeding
stops when you reach this limit.
2-10 Using
Other
paper stops
reaches the
paper factory-set
Printer Functions
moving.
loading position, the
when