Epson Stylus 800 User Manual page 79

ASCII
Hex.
Dec.
from 0 - 127 to 128 - 255 (unless a
Description
character table has been
assigned to 2 with the ESC ( t
command)
Select an International Character Set
Define User-Defined Character
data: 3 bytes required for each
character; super/subscript requires
only 2 bytes per character
Copy ROM to RAM
command description)
Select User-Defined Set
Enable Printing of Upper Control Codes
This command enables the printing of
codes 128-l 59 (if current table has
characters in those locations).
Enable Upper Control Codes
Cancels ESC 6
Print Data as Characters
data: The following n bytes of data
printed as characters
Appendix A-19