Graphics
ASCII
Character Tables
These character tables are selected with the default-setting mode or by
using a command.
All tables except the italic character table are the same as the PC437 table
for hex codes 00 through 7F, so only the PC437 and italic tables are shown
completely. The rest of the tables show only the characters for hex codes
80 through FF.
The tables with + after the table name are available in the European
version only; those with ** are available in the North/South American
Hex.
Description
Dec.
Select Graphics Mode
l
Print Raster Graphics
Cancel Graphics mode with ESC @
in 3600/v DPI
in 3600/h DPI
1 <m124
Total dots = n 1 + n2 x 256
The following combination is not
l
allowed:
Appendix A-21