Auto line feed
When the auto line feed feature is
code is accompanied by a line feed (LF) code. If your printed
text is unexpectedly double-spaced, set this feature to off. If text
lines print on top of each other, set it to on.
Changing the
To change the printer's default settings, you press the control
panel buttons; the control panel lights show your selections.
Follow the steps below to make your changes:
1. Make sure the printer is turned off and paper is loaded in
the paper feeder.
2. Hold down the ECONOMY/CONDENSED button and turn
on the printer to enter the default-settings mode. (Hold
down the button until the printer starts working; it takes a
few seconds.)
The printer loads a sheet of paper and prints a brief
summary and instructions. It instructs you to select the
language that you want messages printed in (English,
French, German, Italian, or Spanish).
3. Press the FONT button until the FONT lights indicate the
language of your choice; then press the ALT button to make
your selection.
default settings
Language
English
French
German
Spanish
0
l
Off
each carriage return (CR)
on,
FONT light
l
O@
Using Other Printer Functions
2-15