114
|
Maintaining and Transporting the Printer
To enable printable pages, press the
•
, then press the
COUNTER
select an option, then press the
button when done.
To change the units of measurement, press the
•
see
, then press the
UNIT
switch from
METER
the units you want. Press the
To change the default cutting pressure, press the
•
see
CUT PRESSURE
. Press the
100%
to increase it (in 1% increments). Press
setting you want. Press the
To run a super strong cleaning cycle, press the
•
see
, then press the
SSCL
to start the cleaning cycle.
Menu
To enable or disable roll paper feeding at power-on, press the
•
button until you see
button. Press the
press the
Menu
To return all control panel settings to their default values, press the
•
the
button until you see
button to display
default settings.
To check the ink cartridges, press the
•
INFO MENU
each cartridge, then press
3. To exit the maintenance mode, turn off the printer by pressing the
P power button. Press the P power button again to turn on the printer
in the normal operating mode.
114
Menu
Menu
Menu
to
FEET/INCH
button when done.
, then press the
button to decrease the pressure, or the
button when done.
Menu
ROLL PPR FEED
button until you see the setting you want, then
button to select it.
DEFAULT PANEL
Press
EXEC.
Menu
, then press
Menu
Menu
button until you see
button. Press the
button. Press the
button until you
button. Press the
button to
, then press
Menu
button until you
button to display
Menu
to select the
Menu
button until you
button to display
EXEC
, then press the
Menu
, then press the
again to restore the
button until you see
. Press the
button to select
to view the information.
PAPER
button to
to select
button
. Press
Menu
CRTG