Table of Contents
Advertisement
8. Press the ink cartridge clamp down until it locks in place.
The following illustration shows color ink replacement. For
black ink replacement, press down the smaller clamp on the
left.
c
9. Press the
The printer moves the print head and begins charging the
ink delivery system. This operation takes about two
minutes to complete.
When the ink charging process is finished, the P power light
stops flashing.
c
Note:
Even if you do not press the
print head and begins the ink charging process about 60 seconds after
you replace the cartridge.
8-38
Troubleshooting
Caution:
Once you install the cartridges, do not open their clamps
again until you replace the ink cartridges. Otherwise, the
cartridges may become unusable.
E
load/eject button, then close the printer cover.
Caution:
The P power light continues to flash while the printer
performs the ink charging operation. Never turn off the
printer while this light is flashing. Doing so can result in
incomplete charging of ink and you will not be able to
print with the printer.
E
load/eject button, the printer moves the
Advertisement
Table of Contents
