Table of Contents
Advertisement
To replace an ink cartridge while the B and A ink out lights are
off, follow these steps.
Caution:
c
G
Once you remove an ink cartridge it becomes unusable
and cannot be reinstalled, even if ink remains in it.
G
Leave the old cartridge installed in the printer until you
are ready to replace it with a new one.
1. Make sure the printer is on. The P power light should be on,
but not flashing.
2. Lower the output tray at the front of the printer; then open
the printer cover.
3. Hold down the
print head moves to the replacement position. The P
power light begins flashing.
Caution:
c
Do not move the print head by hand. Always use the
load/eject button to move it. Otherwise you may damage
the printer.
E
load/eject button for three seconds. The
E
Troubleshooting
8
8-35
Advertisement
Table of Contents
