Epson SureColor P700 Quick Start Manual

Epson SureColor
®
Start Here
IMPORTANT: Before using this product, make sure you read these
instructions and the safety instructions in the online Userʼs Guide.
Note: This printer is designed for use with Epson
third-party cartridges or ink. For important ink information, visit
www.epson.com/epsonink (U.S.) or www.epson.ca/epsonink (Canada) or
see your printer box.
The illustrations show the SureColor
for the SureColor P900, unless otherwise specified.
Choose a location for the printer
Choose a location for the printer that is near a wall outlet where the
power cord can be easily unplugged. Avoid places subject to rapid
changes in temperature and humidity. Also keep the printer away from
direct sunlight, strong light, or heat sources.
Make sure the productʼs rubber feet rest completely on a sturdy surface
capable of supporting the following weight:
SureColor P700: 30 lb (13.7 kg)
SureColor P900: 35 lb (15.9 kg)
Unpack
1
Make sure you have these items:
Printer
Note:
‹ See the online Userʼs Guide for instructions on using the disc tray.
‹ Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
2
Remove all protective materials from the product.
P700/P900
®
cartridges only, not
®
P700, but the steps are the same
®
Power cord
Ink cartridges
Disc tray Limited warranty
3
Open the front and printer covers, and remove all protective
materials from inside the product.
Caution: Do not touch the ink tube.
4
Close the printer and front covers.
5
Open the rear paper feeder and port cover, and remove all
protective materials.
6
Close the port cover and rear paper feeder.
Turn on
1
Connect the power cable.
Caution: Do not connect to your computer yet.
2
Press the power button.