Verifying File System Operation - HP StorageWorks P9000 Configuration Manual

1. Edit the /etc/fstab file to add one line for each device to be automounted.
Each line of the file contains: (A) device name, (B) mount point, (C) file system type ("ext2"),
(D) mount options ("defaults"), (E) enhance parameter ("1"), and (F) fsck pass 2.
Example
/dev/sdb
/dev/sdc
/dev/sdd
A
Make an entry for each device. After all the entries are made, save the file and exit the editor.
2. Reboot the system.
3. Display the mounted devices using the df
automounted.
Example
# df -h
Filesystem Size Used Avail Used% Mounted on
/dev/sda1
/dev/sdb1
/dev/sdc1
#

Verifying file system operation

Verify file system operation by copying a file to each device.
/A5700F_ID08 ext2
/A5700F_ID09 ext2
/A5700F_ID10 ext2
B C
1.8G 890M 866M 51%
1.9G 1.0G 803M 57%
2.2G 13k 2.1G
defaults 1 2
defaults 1 2
defaults 1 2
D E F
h command and verify that the devices were
/
/usr
0% /A5700F-LU00
Configuring disk array devices 75