HP StorageWorks P9000 Configuration Manual page 41

1 1. Press Esc until you are returned to the Available Devices screen. Repeat
create the disk partition on each new OPEN-x and LUSE device.
12. When you are finished creating disk partitions, return to the Available Disk Options screen,
click Return to previous menu and press Enter.
NetWare 6.0
1. Start ConsoleOne on the Windows server.
2. Select and right-click the targeted server, and then click Properties.
3. Select the Media tab, click Devices, and then initialize the new devices.
4. Click the Partitions option on the Media tab, select the desired device, and then select New....
The Create a new partition screen appears.
5. On the Create a new partition screen, select the desired device, select NSS in the Type box,
and click OK.
6. Enter the partition size in bytes (B), kilobytes (KB), megabytes (MB), or gigabytes (GB), and
then click OK.
7. To reserve space for the Hot Fix error correction feature, select Hot Fix and enter the amount
of space or percentage you want to reserve.
Mirrored partitions must be compatible in data area size. This means the new partition must
be at least the same size or slightly larger than the other partitions in the group. The physical
size (combined data and Hot Fix size) of the partition must be at least 100 KB larger, but no
more than 120 MB larger than the data size of the existing partitions in the mirror group.
8. To mirror the partition, select Mirror and select one of the following options:
Create New Mirror. This option means you are making the partition capable of being
part of a mirror group. You do not actually create the group until you add another mirrored
partition to the partition you are creating.
Existing Mirror Group. (If you select this option, also select the ID of the mirrored partition.)
This shows a list of existing mirror groups that are compatible in data area size. This
option lets you add this new partition to one of the mirror groups in the list.
9. Select NSSPools on the Media tab, and select New....
The Create a New Pool screen appears.
10. On the Create a New Pool screen, enter the name for the new pool, and click Next.
1 1. Select the disk to be included in the pool, and click Next.
12. On the Create Pool – Attribute Information screen, check Activate on Creation to make the
new pool active, and then click Finish.
13. Select a label for the partition (optional).
14. Click OK.
NetWare 6.5
1. Enter NSSMU at the server console.
2. In the main menu, select Partitions.
3. Press Insert, then select a device where you want to create a partition.
4. Select NSS as the partition type.
5. Enter the size of the partition in bytes (B), kilobytes (KB), megabytes (MB), or gigabytes (GB),
and then click OK.
Step 4–Step 10 to
Configuring disk devices 41