Loading Postcards - Epson LQ-2180 User Manual

Caution:
c
Because printing on the edge of an envelope may damage the
print head, make sure the printing stays entirely within the
printable area of your envelopes. See Appendix C for details on
the printable area of envelopes.

Loading postcards

You can load postcards one at a time in the top or front paper
slot as described in "Loading Single Sheets in the Top Paper Slot"
(on page 3-8) or "Loading Single Sheets in the Front Paper Slot,"
(on page 3-10). Also, follow these guidelines:
If you load postcards long edge first, always load them in the
top slot.
Set the paper thickness lever (located under the printer cover)
to position 2.
Before printing, turn on the card mode by pressing the Tear
Off/Bin button until both Tear Off/Bin lights are on.
After you finish printing on postcards, press the Tear Off/Bin
button once to exit the card mode. (Bin 1 is selected.)
Use postcards only under normal temperature and humidity
conditions, as follows:
Temperature 15 to 25°C (59 to 77°F)
Humidity 30 to 60% RH
Printing on Single Sheets
3
3-7