Control Panel Buttons And Lights - Epson LQ-2180 User Manual

Control Panel Buttons and Lights

Font button
Selects the font.
See Chapter 5.
Font lights
Indicate which
font is selected.
Tear Off/Bin button
Advances continuous paper to the
tear-off position.
Feeds continuous paper backward
from the tear-off position to the top-of-
form position.
Selects a cut-sheet feeder bin when the
cut-sheet feeder is installed.
Enters the card mode to print on
postcards and envelopes. See
Chapter 3.
Tear Off/Bin lights
when continuous paper is in the
tear-off position.
when bin 1 of the optional cut-
sheet feeder is selected.
when bin 2 of the optional cut-
sheet feeder is selected.
when the printer is in the card
mode.
= On
= Flashing
= Off
Pitch button
Selects the font size.
See Chapter 5.
Pitch lights
Indicate what font
size is selected.
Pause button
Stops printing
temporarily, and
resumes printing when
pressed again.
Pause light
On when the printer
is paused.
Flashes when the
printer is in the micro
adjust mode.
LF/FF button
Feeds paper line by
line.
Ejects a single sheet
or advances
continuous paper to
the next top-of-form
position when held
down.
Micro Adjust
When holding down the Pause button for three
seconds, the printer enters the micro adjust mode.
Using the micro adjust feature, you can press the
and buttons to adjust the top-of-form or tear-off
position. See Chapter 2.
Paper Out light
On when no paper is
loaded in the selected
paper source or paper
is not loaded correctly.
Flashes when paper
has not been fully
ejected or a paper jam
has occurred.
Operate button
Turns the printer on
and off. The printer
is off when the top
of this button is
even with the
button protectors.
Load/Eject button
Loads a single sheet of
paper.
Ejects a single sheet of
paper if a sheet is
loaded.
Loads continuous paper
from the standby
position.
Feeds continuous paper
backward to the
standby position.