Epson LQ-2180 User Manual page 59

2. Open the paper guide cover, and tear off the printed
document using the tear-off edge of the printer.
Note:
If your paper's perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the micro adjust
feature. See "Adjusting the tear-off position" on page 2-40.
c
3. Close the paper guide cover.
When you resume printing, the printer automatically feeds
the paper back to the top-of-form position and starts printing.
To remove the remaining paper from the printer, press the Load/
Eject button to feed the paper backward to the standby position. (See
the Glossary for an explanation of the standby position.) Then open
the sprocket covers of the tractor and remove the paper.
Caution:
c
Always tear off your printed document before you press the
Load/Eject button. Reverse feeding several pages at a time may
cause a paper jam.
2-14
Printing on Continuous Paper
Caution:
Never use the knob to adjust the tear-off position; this may
damage the printer or cause it to lose the tear-off position.