TRENDnet TV-IP400 User Manual page 62

Make sure to save any changes you have made to keep the
information updated.
Note :
You are allowed to add only one camera at a time.
When the user adds the camera, the additional control/
configuration buttons will appear, including: Assign IP to Camera,
Connect/Disconnect, Erase, Extra Information, etc.
Pan/Tilt control buttons will appear on the Control Panel.
Camera Config
Assign IP to Camera
Connect / Disconnect
Liberate Extra Information
Motion record
Schedule record
Manual record
61
Also, the
Pan/Tilt
Control Buttons