TRENDnet TV-IP400 User Manual page 27

System Administration
The Configuration window contains commands for settings that
are required to input key details to setup the camera for operation.
Click Configuration in the top menu bar and the Configuration
window will appear as below:
System
Click the System item in the left column to setup the basic
configuration of your camera (as shown above).
- System Setting: In this field, you can configure the
basic information of your camera.
Camera Name: This field is used to enter a
descriptive name for the device. The default setting
for the Camera Name is CS-xxxxxx, where
Configuration
xxxxxx
26
is