Flushing And Cleaning - Graco DELTA SPRAY XT GUN 310692D Instructions - Parts Manual

Flushing and cleaning

Gravity and Siphon Feed Guns
1. For packages that include fluid cups, use the follow-
ing chart for flushing and cleaning instructions.
Cup attachment
™ ™
3M PPS
Gravity Cup
Siphon Cup
Pressure Cups
2. Continue to step 8 to perform daily cleaning of the
Delta Spray XT gun.
Pressure Feed Guns
WARNING
Follow Pressure Relief Procedure, page 13 when
you stop spraying and before cleaning, checking, ser-
vicing, or transporting equipment. Read warnings,
page 3.
1. Relieve the pressure, page 13.
2. Disconnect the fluid supply hose and air supply
hose from the gun.
F . 13
IG
310692D
Instruction Manual
310693
308792
308792
308791
ti4944a
ti4945a
3. Connect the solvent supply hose to the gun.
F . 14
IG
4. Hold metal part of gun against a grounded metal
container, trigger, and flush the gun with solvent
until all traces of paint are removed from the gun
passages.
F . 15
IG
5. Turn off the solvent supply.
6. Relieve the pressure.
7. Disconnect the solvent supply hose from the gun.
F . 16
IG
Daily Gun Maintenance
ti4854a
ti4836a
ti4944a
15