Graco DELTA SPRAY XT GUN 310692D Instructions - Parts Manual page 10

Connecting the fluid hose
(Pressure feed guns only)
1. To control fluid pressure to the gun, install a fluid
regulator on the fluid line.
2. Connect the fluid hose (J) to the gun fluid inlet (B)
3/8-18 npsm [R 3/8-19] compound thread.
F . 5
IG
3. Connect the other end of the fluid hose (J) to a regu-
lated fluid supply line.
10
B
J
ti4854a
Connecting the fluid supply
For packages that include fluid cups, use the following
chart for installation instructions.
Cup attachment
3M PPS
Gravity Cup
Siphon Cup
Pressure Cups
Positioning the Air Cap
Rotate the air cap as needed to achieve the desired
spray pattern direction. To create a round pattern, turn
the pattern air off by turning the pattern adjustment knob
(25) fully clockwise. See F
F . 6
IG
Setup
Instruction Manual
310693
308792
308792
308791
. 7.
IG
ti4839a
310692D