Hex Dump - Epson EX-1000 User Manual

Hex dump

See Data dump.
Initialize
Return the printer to its defaults.
Interface
The connection between the computer and the printer. A serial
interface transmits data one bit at a time and a parallel interface
transmits data one character or code at a time.
Italic
A typestyle in which the characters slant. This sentence is italicized.
L i n e f e e d
A control code or button that advances the paper one line space.
The distance that the paper moves between lines. Standard line
spacing is 1/6th of an inch, but it can be changed by software
commands.
Near Letter Quality
One of two methods of printing on the EX. Near Letter Quality
reduces the print speed and increases the number of dots per
character to increase the print quality Draft uses a minimum number
of dots per character for high-speed printing.
Number systems
Three number systems are commonly used with printers:
Decimal is base 10 and uses the digits 0, 1, 2, 3, 4, 5, 6, 7, 8, and 9.
(This is the system with which most people are familiar.)
Hexadecimal (hex) is base 16 and uses the digits 0, 1,2,3,4, 5, 6,
7,8, 9, A, B, C, D, E, and E This is frequently used by programmers.
Any decimal number between 0 and 255 can be expressed by a two-
digit hex number.
Binary is base 2 and uses only the digits 0 and 1. All information in
computer systems is handled in binary form and represented by
electrical signals that are ON or OFF A binary digit is often called a
bit; any decimal number between 0 and 255 can be expressed by an
8-bit binary number.
GL-4
(NLQ)
Glossary