Ibm Printer Emulation Mode - Epson EX-1000 User Manual

IBM Printer Emulation Mode

This section shows the characters available in IBM printer emulation
mode.
There are two main character tables: standard (CG Table 1) and
international (CG Table 2). The standard table is selected when DIP
switches 1-6 to 143 are all UP; the international table is selected by any
other setting of these three switches. You can also switch between the
two tables using the ESC 6 and ESC 7 commands.
To print characters from the symbol set use either the ESC ˆ
command or ESC \. For example, to print the symbol 1 in BASIC the
command is as follows:
If you use ESC ˆ or ESC\ to send a non-printable code, a blank is
printed.
All three tables are the same for codes from 32 to 127, and the
symbol table is identical to the international table from 128 to 255.
Character Tables
B-11